Instant Grab Contractor Pack - Water Based Adhesive #310

MSRP: $129.00
Was: $129.00
Now: $119.00
(You save $10.00 )
(No reviews yet) Write a Review
Model No.
AX310-24
UPC:
8699396036490
Coverage:
Styrofoam Ceiling Tiles ( 8-12 tiles per tube ), Faux Tin 2ft x 2ft (6-8 tiles per tube)
Tube Per Pack:
24
Tube Size:
10oz

How many tiles do I need?:


Ceiling / Wall Tile Project Estimator
* Enter your ceiling area of room
Length ft.&Width  ft.
or total area in square feet.
* Enter your ceiling tiles size
  
Minimum number of tiles needed
Tiles needed with 15% of waste
Minimum number of Instant Grab adhesive #310 (Caulk gun needed)
Note: It is important to add a 15% more tiles to this number for waste.
Enter your Email
Moldings Project Estimator
* Enter linear footage of room in
Length ft.&Width  ft.
or total area in linear feet.
* Type
  
Minimum units of Moldings needed
Coverage area ln. ft.
Moldings needed with 15% of waste
Note: It is important to add a 15% more moldings to this number for waste.
Enter your Email

Akfix #310, is aQuick-grab formula provides a high-strenght, heat and water resistant bond to variety of substrates. 

 

Properties: Interior & Exterior. Excellent adhesion. Instant Grab. Weatherproof. Paintable. Solvent-free. Low Odor. Water Clean-up

Applications: Recommended for any kind of wood construction decorative panels, brick, concrete, tile, wood, plywood, treated lumber, plaster, ceramic, PVC, cork, vinyl, masonry, glass, non-polished, stones, polysterene, aluminum and metal. Remodeling projects filling gaps and cracks.

Instructions: The substrate must be dry clean and free of grease. One of the surfaces must be poures to province a faster curing rate.  Application temerature must be between+5 C (41 F) and 35 C (95 F).  Apply the adhesive to the edges and corners of the materials to be bonded. Press the materials together and fix properly.  The materials can still be moved immedietly after bonding.  It may be required to provide support during setting.  As long as the adhesive has not been fully cured it must be protected against water and moisture.  The excessive adhesive can be cleaned with water if it has not cured yet.  Not suitable for areas which are constantly exposed to water.

Not Recommnded: It does not bond mirrors as one surface must be poures. 

VOC:0%

Write a Review